2002 Chevy Silverado Oil Pan Removal. Most folks just wind up stripping the head off of the bolt. 53,816 answers when you say the pan will not drop down do you mean that it is still stuck to the block.
Remove the oil pan bolts. Remove the oil filter, it looks like the replacement one you bought. Install the crankshaft oil deflector and nuts until snug.
I don't know about your particular application but i always disconnect the cooler line from the tran and attach 6 feet of trans hose to the line with the open end in a bucket. Take some fresh oil and lube the seal of the new oil filter and screw it in nice and tight. Drain plug for transmission pan.
Have the same issue in 2002 with 5.3l ffv. If that is the case manufacturers use a gasket material ( sealer that is an. Do not allow foreign material to enter the oil passages of the oil pan, cap or cover the openings as required.
Raise and support the engine. Remove the oil filter, it looks like the replacement one you bought. Tighten the bolts to 25 n·m (18 lb ft).
Remove the oil filter adapter. Afe power's new engine oil pan brings performance engineering to the protection of your engine. 3.make sure to have exact oil pan ready with seal in hand.
When performing an oil change on the car you will first want to make sure that the vehicle has been. Remove the oil pan drain plug and drain the engine oil into a suitable container. Put the bolt from the oil pan back.
Comments
Post a Comment